JESANI® Appliance Channel installation – New installation

TIMBER SUBSTRATE FLOORING

Note:  Please check the Facts sheet before the purchasing and installation processes.
Note:  Ensure alignment of channel position is correct before channel installation.

  1. Measure trough of channel and cut timber flooring to allow the trough to hang in slot and the flanges to sit flush on top of floor.
  2. Fix the flanges of the channel to timber flooring using the predrilled holes, ensuring the wider flange sits underneath the appliance.
  3. Waterproof flooring to cover the full flange on both sides of the Channel.  It is optional to waterproof into the trough, however ensure the waste in not covered.
  4. Install finished flooring to fully cover the flanges.  It is recommended to utilise a tile edge on the wider flange of the channel.
  5. Install Grill/Grate

 

JESANI® Appliance Channel installation – New installation

Concrete Floor/Suspended Concrete Floor

Note:  Please check the Facts sheet before the purchasing and installation processes.
Note:  Ensure alignment of channel position is correct before channel installation.

  1. Locate position of where channel will be placed on floor slab and ensure Plumber/Drainlayer situates waste pipe accordingly. Position boxing to ensure area for the appliance channel can be constructed. Be careful not to damage damp-proofing.
  2. Position Jesani® Appliance Channel into the area, ensuring the larger size flange is appliance side and connect with the waste pipe.  Use concrete to pack around Channel so it will sit firmly in position.  Allow this concrete to dry for minimum 12 hours.
  3. Once the concrete has dried, us nylon plugs and screws to fix flanges of channel into place using the predrilled holes.
  4. Waterproof floor to cover both flanges of the Channel.  Note:  It is optional to waterproof into the trough, however ensure the waste is not covered.
  5. Tile/Finished flooring over waterproofing to cover both flanges utilising a tile edge on the appliance side for a nice clean finish.
  6. Insert Grill/Grate.

 

^ Back to top